ลองเช็คราคาโมดูลเซนเซอร์ 3 PIN IR Infrared Obstacle Avoidance สำหรับ Arduino
ไม่ว่าสินค้า โมดูลเซนเซอร์ 3 PIN IR Infrared Obstacle Avoidance สำหรับ Arduino จะได้รับการกดถูกใจ 51 ครั้งบนช้อปปี้ แต่นั่นไม่สำคัญเท่ากับประสบการณ์สั่งซื้อของผู้ซื้อที่ได้รับการรีวิวเกี่ยวกับสินค้า โมดูลเซนเซอร์ 3 PIN IR Infrared Obstacle Avoidance สำหรับ Arduino บนแพลตฟอร์มช้อปปี้ ที่ได้รับการจัดจำหน่ายโดยร้านค้า isinwei.th หากคุณกำลังมองหา โมดูลเซนเซอร์ 3 PIN IR Infrared Obstacle Avoidance สำหรับ Arduino ด้วยราคาล่าสุดที่เราทราบเพียง 12฿ จากราคาปกติ 47฿ อาจเป็นราคาสินค้าที่คุณกำลังมองหา โปรดแวะเยี่ยมชมรายละเอียดสินค้าและรีวิวคร่าว ๆ เบื้องต้นก่อนการตัดสินค้ากดปุ่มไปสั่งซื้อสินค้ายังผู้ขายได้แก่ร้านค้า isinwei.th บนช้อปปี้
ลองทบทวนรายละเอียดสินค้า อุปกรณ์เน็ตเวิร์ค จากร้าน isinwei.th ซึ่งมีผู้ซื้อสินค้านี้ไปแล้วกว่า 776 ชิ้น นอกจากนี้ยังมีคะแนนรีวิวจากผู้ซื้ออีก 4.9/5 คะแนน ไม่แน่สินค้านี้อาจช่วยแก้ปัญหาให้คุณก็ได้..
Smart Car Robot Reflective Photoelectric 3pin IR Infrared Obstacle Avoidance Sensor Module for arduino Diy Kit
Two modules Parameter Description
When the module detects an obstacle in front of the signal , the circuit board green indicator light levels while continuing output low signal OUT port , the module detects the distance 2 ~ 60cm, detection angle 35 °, the distance can detect potential control to adjust, adjust potentiometer clockwise , the detection distance increases ; counterclockwise adjustment potentiometer, detection distance decreases.
2, the sensor active infrared reflection survey , so the target reflectivity and shape of the detection range of the key. The minimum detection distance which black and white max ; small area of the object distance is small , a large area from the Grand .
3 , the sensor module output port OUT can be directly connected to the microcontroller IO port , but also can directly drive a 5V relay ; Connection : VCC-VCC; GND-GND; OUT-IO
4 , the comparator using LM393, job stability ;
5 , can be 3-5V DC power supply for the module . When the power is turned on, the red power indicator light ;
6, with 3mm screw holes for easy mounting, installation ;
7 , the circuit board size : 3.1CM * 1.5CM
8 , each module is shipped already comparing the threshold voltage adjustable via potentiometer good, non-exceptional circumstances , do not arbitrarily adjust the potentiometer.
Three module interface specification ( 3-wire )
1 VCC external 3.3V-5V voltage ( 5v microcontroller and can be directly connected to 3.3v MCU )
External GND 2 GND
3 OUT small board digital output interfaces ( 0 and 1 )
Four shipping list
A sensor module shown a barrier
2 20cm DuPont line 3 easy connection
#Sensor #Module #Arduino